INSTALLATION:

INSTALLATION IS EASY!  But, since your BIGSHOT isB-I-G, we recommend two people for installation. Please be gentle at all times.  Although your BIGSHOT is printed on a durable material, it CAN rip or tear if mishandled.

Remove your BIGSHOT from the tube, and unroll it.  Let your BIGSHOT hang out at room temperature unrolled for about an hour before application.  Your BIGSHOT needs
to stretch out and relax a bit before it is applied.

Pick a smooth painted surface.  You may want to measure to make sure you have enough room to fit your BIGSHOT.

Make sure the surface is CLEAN!  Your BIGSHOT likes a clean, dry, smooth wall.  Clean the area selected, using water only, to ensure no dirt or residue will adhere to the adhesive backing of your BIGSHOT.  Let the wall dry completely before moving on.  NOTE: Do not clean the wall with any chemicals or soaps.  Your BIGSHOT is allergic to them. 

CAREFULLY remove the outer white material that surrounds your BIGSHOT.  Throw away the outer material.  Next, carefully remove your BIGSHOT from the backing paper.

Once your BIGSHOT has been completely peeled from the backing each of the two installers should hold one of the top corners.  Place the BIGSHOT to the area you have selected to display it and press these corners to the wall.  Do not concern yourself with the air-bubbles at this time.  If the BIGSHOT sticks to itself, DO NOT PANIC, gently pull the two areas apart and re-apply.

Beginning from the center of the BIGSHOT and using your hand, apply pressure and rub from the center to the outer edges to apply.  Should you need to, you can always gently remove and re-stick sections to “smooth” it out.

Gently smooth out any bubbles in your BIGSHOT using your hand or the squeegee that is provided.

Roll and store the white paper backing in the shipping tube for future use in the event you decide to remove and store your BIGSHOT.

ENJOY YOUR BIGSHOT!  SHOW ALL YOUR FRIENDS!
YOUR BIGSHOT LOVES AND DESERVES ATTENTION!